28KHz Digital Ultrasonic Cleaner 15L Sus304/316 Tank With Cooling System
Company composition
Our R&D department can be divided into five sections:mechical structure design section,electronic design section,software developing section,graphic design section,testing section.All menbers are excellent engeineers who have at least 5 years' R&D experence.They are good at introducing most advanced technologies in the world in the world into products and make some innovative improvement.
About an order :
- there is no MOQ in our factory.
- Could customized the model for you.
- 1year warranty.
- engineer's technology support
- heating and power adjustable
Advantage:
Ultrasonic is widely used throughout industries to remove difficult contaminants from the parts during or after manufacturing process which might require a stage of cleaning before the next process. In general, if an item can be cleaned with liquid, it can be cleaned much faster and more thoroughly with an ultrasonic cleaner. Compared with traditional solvent/scrubbing, our ultrasonic cleaners:
- Are more effective at removing contaminants;
- Are quicker to get a good cleaning effect;
- Save labor time of employees (and subsequent labor cost);
- can heat the cleaning solutions to a suitable cleaning temperature so as to enhance the cleaning efficiency;
- Have a digital controller of high-precision and a long service-life;· Are of high performance;
- reduce chemicals in the cleaned stuffs;· Are environment friendly because of its recyclabilit
Product detail
As you can see,This machine is make of seven button which include degass,heating and timing.Basket are free ,and you can see that the details are perfect,such as handel ,anti-slip feed ect.
Application
Industrial ultrasonic cleaner are suitable to clean irregular and complex specialized instruments,components and PCBs of sundry shops,workshops,factories etc.
Efficacy:
Specification
| Model: | DK-3000D |
| Tank Size(mm): | 330*300*150 |
| Overall Size(mm): | 360*330*330 |
| Capacity: | 15L |
| Frequency(KHz): | 28 or 40 |
| Ultrasonic Power(W): | 360 |
| Heating Capacity(W): | 400 |
| Timing Range(min:secs): | 1~99 |
| Temperature Range(℃) | 0~80 |
| Water Drainage | Yes |
Plug
Havemany kind of plug,such as:UL,SAA,VDE,JAPAN OLUGE,SABS,THE UK PLUGE .
Certifications
All Dekang’s standard products have achieved most international standards, such as CE certification, RoHS certification, FCC certification etc. Besides, all no-standard products also can satisfy all requirements of these most international standards.So you could trust us,we will do our best for you!
How to use?
1. Fill the stainless steel tank with cleaning solution; Plug the power lead into grounded outlet; After power-on, the temperature displays the actual environmental temperature, LED displays 3 minutes (default ultrasonic time).
2. Time setting: Press the “TIME-/TIME+ ”shortly at a time means time increase/reduce 1min at a time, press and hold means time will increase/reduce by 10mins continuously. The cleaning stops when the timer counts down to 00:00. If the unit needs to be stopped before the timer runs up, press “Ultrasonic” button.
NOTE: Do not run the cleaner continuously for more than one hour
3.Temperature setting: Press “temperature-/temperature+”shortly at a time means time increase or reduce 1℃ at a time, press and hold there means time will increase or decrease by 10℃ . Usually, the best cleaning temperature is within 40℃ to 60℃.
4. After time and heat setting, press “Heating” or “ultrasonic” button to start both function. Press “Heating” button again, the heating function will stop. The same for Ultrasonic Function.
5. Degas mode: work intermittently,i.e., 6s “ON” + 2s “OFF” working mode.
It can clean items deeply and efficiently.
6. Drain: press the “drain” button to open or close the automatic valve. The automatic valve will close a certain time (10 minutes in default) later after drain.
7. Empty the tank and clean both the outside and inside of the cleaner with a clean and dry cloth for next use.
NOTE: Do not pour water out until it’s cooling, Hot water will hurt you and damage the machine itself.
FAQ
Q1. Are you a factory of trading company?
We are professional manufacturer.We are warmly welcome clients from worldwide to visit our factory and cooperation with us.
Q2.Can I get some samples?
Yes,we are honored to offer you samples of most products.
Q3. Can we print our own brand for the fixtures ?
Of course.We are pleased to be your OEM manufacturer and meet your OEM requirements
Q4. What’s the Payment?
T/T would be better with quick transfer and few bank fees. You can also use Western Union and Paypal,Alipay also valid here.
Q5. What certifications does the product get?
CE,RoHS,FCC&ISO9001.Other certification could be made if you pay for it!
Q6, What is the guarantee period?
1 year,our engineer technology support will be always here!
Product Tags:
|
|
28KHz 15L Digital Ultrasonic Cleaner SUS 304 / 316 Tank With Cooling System Images
|
